| MODEL | NCF –1000 | NCF – 1300 | NCF – 1600 | NCF – 2200 | ||
| Material Width (mm) | 1000 | 1300 | 1600 | 2200 | ||
| Material Thickness (mm) | NCF-A 0.1~2.2 NCF-B 0.2~3.2 NCF-C 0.5~5.0 |
|||||
| Feed Length (mm) | 0~9999.9 | |||||
| Max. Feed Speed (m/min) | 16 | |||||
| Rolls Release | Pneumatic | |||||
| Input Power | 3 phase AC 380V/415V | |||||
| Servo Motor | SIEMENS, Germany / YASKAWA, Japan | |||||
| Servo Drive | SIEMENS, Germany / YASKAWA, Japan | |||||
| PLC | SIEMENS, Germany / MITSUBISHI, Japan | |||||
| HMI | SIEMENS, Germany / WEINVIEW, China | |||||
| Low Voltage electrical Components | SCHNEIDER, Franc | |||||
*The contents are subject to change without prior notice.
Introduction
- All feed rolls are made of 40Cr, finished fine machining, heat treated, hard chrome plated and grind. Hardness is up to HRC58°~60°
- Feed rolls are power driven through a precision gear train.
- High-precision feed: NCF models are controlled by computer closed-circuit feedback system, so the feed precision is within +/-0.03mm.
- Phase-style feed function: It is available to input 20 groups of different feed length, each group provides punching for 999 times to satisfy the processing and production of special products (option).
- Manual model: It is availabe to input 3 phases manual speed so that users operate more easily and feed materials more accurately.
- High-efficiency release device: NCF models can set up release angle quickly, only mact CAM signal of and adjusted feed thickness can done.
- Feed length set up: Input feed length on the control screen directly.
