| MODEL | NCF –100 | NCF – 200 | NCF – 300 | NCF – 400 | ||
| Material Width (mm) | 100 | 200 | 300 | 400 | ||
| Material Thickness (mm) | NCF-A type 0.2~2.2 NCF-B type 0.3~3.5 NCF-C type 0.5~4.5 |
|||||
| Feed Length (mm) | 0~9999.9 | |||||
| Max. Feed Speed (m/min) | 16 | |||||
| Rolls Release | Mechanical release | |||||
| Input Power | 3 phase AC 380V/415V | |||||
| Servo Motor | SIEMENS, Germany / YASKAWA, Japan | |||||
| Servo Drive | SIEMENS, Germany / YASKAWA, Japan | |||||
| PLC | SIEMENS, Germany / MITSUBISHI, Japan | |||||
| HMI | SIEMENS, Germany / WEINVIEW, China | |||||
| Low Voltage electrical Components | SCHNEIDER, Franc | |||||
Introduction
- Adopted specially treated straightening rollers, especially suitable for stretching steel, enhancing the procession precision.
- Apply to high speed feeding, long stroke length feeding, significantly improves productivity and feeding accuracy (within±0.03mm).
- User-friendly operation panel makes it easier to input amount of feeding length directly. The range of feeding length is from 0.1mm to 9999.99mm.
- Input 20 sets of different feeding length. Each group provides stamping for 999 times to satisfy the processing and production of special products (option).
- Manual mode: It is available to input 3 phases manual speed so that users operate easily and freely.
- Job storage provides maximum flexibility and reduced set-up time.
- All high-hardness and anti-friction rolls are made from heat-treated alloy steel with hard chrome plating and precision ground. The hardness is up to HRC60.
- Feeding rolls are power driven through a precision gear train.
- Servo feeder is generally divided into two categories: pneumatic servo feeder and mechanical servo feeder. The feeding principle of these two feeders is exactly the same; the difference is how to achieve the release action. Our engineers can analyze your application to determine mechanical release or pneumatic release.
- Set up release angle quickly.
- All electrical components are from advanced worldwide famous brands, such as Siemens, Yaskawa, Mitsubishi, Schneider etc. stable and efficient.
- Simple but rugged construction allows a longer lifetime, easy in installation and maintenance.
- NCF models can combine with the press lines, cut to length lines and stamping systems for coil materials of all manufacturers.
- Custom and application specific solution is available.
Knowledge
Feeding machines are very useful for a number of reasons. Not only is press feeding equipment fast and easy to use it is also economical to use. This type of equipment will provide a consistent flow of nourishment from the water in which it is being used. This will ensure that the horse or pony is getting all of the nutrients and water they need. The equipment can be set up with just one person and will cost less than half the time it would take to prepare meals.
The press feeding equipment can be made up of a variety of items. These items will include hoppers, buckets, feeders and stands. There are a few different types of hoppers that can be purchased depending on how many animals you want to feed and how often the feeder will be used. There are also buckets and feeders that can be made out of wood or plastic. Wooden buckets and feeders look more natural and will provide a better appearance in the barn or stable.
Hoppers can be purchased to hold one or more feeders at once. Feeders that have wheels will need to be bought separately. When looking into purchasing press feeding equipment it will be important to consider the capacity of the hopper as well as what type of hopper will be best for the animal you own.
The main feeder is the most commonly found feeder. It is set up on a platform thatis about twenty-four inches high and eight inches wide. This type of equipment is set up on either side of the animal and is used to feed the animals. Most people will place a hay rake on top of this so that the horse or pony will have something to eat when it is done eating. This equipment is also useful for cleaning horses’ stables.
Stand feeders are another type of press feeding equipment that can be found. They are set up in a similar way to the hopper, but they do not have a platform that the horse or pony will stand on. Instead the feeder will be placed on a stand that is approximately twenty-four inches high and eight inches wide. These stands are great for providing the horse with different types of feeds. They are not as efficient as the hopper and can be harder to clean, but they will definitely provide your horse with something to eat.
You will need to think about what types of press feeding equipment will work best for you and your horse or pony. Talk to other owners to see what equipment they use and see what type they prefer. Consider the cost of each system as well, as it will be more expensive to install if you will be using it yourself. Talk to someone who will be able to advise you on the best type of system for you and your equine friends.
